===================================================
DriveVision Firmware Update v1.4.0
Release Date: 22/10/2026
===================================================

Thank you for choosing DriveVision.

This firmware adds quick SD card formatting and Wi-Fi control
using the photo button, so you can manage these settings
directly from the dash cam without using the app or a computer.

---------------------------------------------------
WHAT'S NEW
---------------------------------------------------
• Format the SD card by holding the photo button for 6 seconds,
  then releasing. No app or computer needed.
• Turn Wi-Fi on or off by holding the photo button for 3 seconds,
  then releasing. The red Wi-Fi light turns on when Wi-Fi is on
  and off when Wi-Fi is off.

---------------------------------------------------
REQUIREMENTS
---------------------------------------------------
• Micro SD card
• SD card reader or adapter
• Computer with internet access

⚠️ NOTE:
This update cannot be installed through the Viidure App.
It must be performed manually using an SD card reader.

---------------------------------------------------
INSTALLATION INSTRUCTIONS
---------------------------------------------------
1. Insert your Micro SD card into the dash cam and format it
   via the camera's settings menu.

2. Remove the SD card and insert it into your computer
   using the SD card reader.

3. Copy the file named "FW96670A.bin" to the
   root directory of the SD card (do not place it inside any
   folders).

4. Insert the SD card back into the dash cam.

5. Power on the dash cam and wait for the update to complete.
   Do not disconnect power during this process.

6. Once finished, turn off the dash cam, remove the SD card,
   and delete the "FW96670A.bin" file from the card.

7. Insert the SD card back into the dash cam and power it on.
   The update is now complete.

---------------------------------------------------
AFTER UPDATING
---------------------------------------------------
To format the SD card at any time:
Press and hold the photo button for 6 seconds, then release.

To turn Wi-Fi on or off:
Press and hold the photo button for 3 seconds, then release.

---------------------------------------------------
SUPPORT
---------------------------------------------------
For assistance, visit our Help Centre:
https://drivevision.com.au/pages/contact

---------------------------------------------------
© 2026 DriveVision Australia. All rights reserved.
DriveVision® is a registered trademark of Dirham Pty Ltd.
Unauthorised redistribution or modification of this firmware
package is strictly prohibited.
===================================================